Ideal Vacuum Products is now selling the new ScrollVac 15 Plus series pumps! This new  ScrollVac15 Plus range from has exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features. The ScrollVac 15 Plus is the best performing pump in its class. The  ScrollVac 15 Plus is up to 20 times quieter than other pumps. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today’s most advanced technologies. NOW with a universal voltage power supply (100-127VAC - 200-240VAC) for performance anywhere in the world. This is the 1 phase motor ScrollVac 15 Plus version with 8.5 CFM.

【Product model】WAU-250/WAU-500/WAU-1000/WAU-2000 Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

【Product model】WAU-250/WAU-500/WAU-1000/WAU-2000 Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.  

【Product model】WAU-250/WAU-500/WAU-1000/WAU-2000 Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

【Product model】WAU-250/WAU-500/WAU-1000/WAU-2000 Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S   Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.  

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

Pumping speed：70L/S、150L/S、300L/S、600L/S、1200L/S Roots vacuum pumps, often referred to as mechanical booster pumps, are ideal for venting gases from sealed containers and cannot be compressed at atmospheric pressure. Roots pumps are often used in conjunction with backing pumps such as rotary vane pumps, liquid ring pumps and oil-sealed rotary piston vacuum pumps. Widely used in metallurgy, chemical industry, electronics, textile and other fields.

N 952Flow Rate (max.): 36 l/minPressure (max.): 0.1 bar (rel.)Vacuum (max.): 1.5 mbar (abs.)

N 952 Flow Rate (max.): 36 l/min Pressure (max.): 0.1 bar (rel.) Vacuum (max.): 1.5 mbar (abs.)

N 952Flow Rate (max.): 36 l/minPressure (max.): 0.1 bar (rel.)Vacuum (max.): 1.5 mbar (abs.)

The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of  25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available

  Step1: inhale and seal all the air in the volume chamber, and the compression begins; Step 2: continue to compress to the center point of the volume cavity; Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon; Step4: exhaust, end of a compression process

Step1: inhale and seal all the air in the volume chamber, and the compression begins; Step 2: continue to compress to the center point of the volume cavity; Step3: compress the air to the center of the volume chamber, and the exhaust will begin soon; Step4: exhaust, end of a compression process

The system has a wide range of applications. No matter the pumping speed, capacity and vacuum pressure, we can make appropriate choices according to the special requirements of customers. Combined with different applications, we can adjust the appropriate system requirements according to the needs of the process, so as to meet the real space requirements of the whole plant or various mechanical equipment applications. 

100% oil free compressed gas, water ring vacuum pump, motor, all are the protection class IP55, class F insulation  dual frequency (50/60HZ) and wide voltage can meet almost all regions of the world the voltage level, the external design of the bearing, can bear high working temperature, improves the reliability and service life  the introduction of variable frequency drive new concept, than the maximum performance can be driven by a common motor is improved to 300%, impeller and pump body seal forms the unique reduced pressure gas pressure loss in the process of compression  pump casing, impeller die-casting molding, sturdiness and durability, excellent heat dissipation, imported Japan Germany, precision machine tool cutting, ensure the accuracy and quality, air pump through the surface of protective paint processing  products through the strict mechanical, electrical performance test, simulation demonstrate the use of PROE, UG, CAD and other computer aided design software and motion  Two stage mounting dimensions  

The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of  25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available  

The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of  25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available