Original blade group 90137301010
The group consists of 10 carbon-made blades
Intended use: Carbon vanes for dry vacuum pumps and compressors. They are easily worn out and need to be replaced according to the operating manual.
Number of blades/group: 10
WN No.: WN124-205
Blade material: carbon
Original blade group 90058500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-164
Blade material: Resin & plastic
The system has a wide range of applications. No matter the pumping speed, capacity and vacuum pressure, we can make appropriate choices according to the special requirements of customers. Combined with different applications, we can adjust the appropriate system requirements according to the needs of the process, so as to meet the real space requirements of the whole plant or various mechanical equipment applications.
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
Original blade group 90137301010
The group consists of 10 carbon-made blades
Intended use: Carbon vanes for dry vacuum pumps and compressors. They are easily worn out and need to be replaced according to the operating manual.
Number of blades/group: 10
WN No.: WN124-205
Blade material: carbon
Original blade group 90058500003
The kit includes 3 blades made of plastic
Specified use: Plastic blades are used for oil-lubricated vacuum pumps and compressors. They wear little and must be replaced during repair or layering.
Number of blades/group: 3
WN No.: WN150-164
Blade material: Resin & plastic
The system has a wide range of applications. No matter the pumping speed, capacity and vacuum pressure, we can make appropriate choices according to the special requirements of customers. Combined with different applications, we can adjust the appropriate system requirements according to the needs of the process, so as to meet the real space requirements of the whole plant or various mechanical equipment applications.
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
The TXW 200–500 series pumps are 100% oil less rotary vane vacuum pumps. They are designed to operate on a continuous basis at any point from atmospheric pressure to a maximum vacuum level of
25"HgV, depending on the model. lubricating graphite composite vanes. Applications include those where regenerative blowers These 100% oil-less, or dry, pumps are ideal for The TXW series pumps are direct drive units and are supplied with TEFC flange mounted electric motors. Each pump is equipped with an integral vacuum relief valve, a 4-micron inlet filter, exhaust silencer, and vibration isolators as standard equipment. applications where oil or water use is objectionable. All Becker TXW series pumps use long-life, self cannot reach a deep enough vacuum, or those where oil-flooded vacuum pumps operate at vacuum levels that emit excessive oil aerosols, often referred to as “smoke”. TXW pumps are ideal for graphic arts, pack aging, vacuum chucking, robotics and material handling, medical/surgical, and air sampling, among others. Also available in tank mounted simplex and duplex, and modular/expandable central vacuum system configurations. Pressure and combination pressure/ vacuum pumps are also available
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
Technical parameters of 2tx-8 series double stage rotary vane vacuum pump
Product features
1. It can operate from one atmosphere to the ultimate pressure
Can be used from atmospheric pressure to ultimate pressure.
2. Under low vacuum pressure, good air extraction speed can still be maintained
low vacuum pressure, it can still maintain a good pumping speed。
3. Low noise and vibration
Low noise, low vibration
4. The built-in outlet filter element can achieve 99.9% oil and gas filtration effect
Built-in outlet filter, up to 99.9% oil and gas filtration effect
5. Super function of eliminating water vapor
Super strong function of removing water vapor
6. Air cooling, economical and convenient < water cooling can also be selected
Air cooling, economical and convenient
7. The air inlet is equipped with a check valve to avoid the reverse flow of vacuum oil when the pump stops
The air inlet is equipped with a check valve to avoid the reverse flow of the vacuum oil when the pump stops.
8. Compact structure, small volume and space saving
Compact structure, small size and space saving
9. It can be used together with various accessories, so it can meet the needs of various applications
It can be used with various accessories, so it can meet the needs of various applications
10. Pumping speed: 8m3/h ~ 65m3/h
Pumping speed: 8m3/h～65m3/h
11. Ultimate partial pressure: 10-4mbar c/s
Limit partial pressure: 10-4mbar c/s
12. Built in anti oil return valve
Built-in anti-return valve
