GS-68 high speed vacuum pump oil roots pump oil 68 vacuum pump oil 16L

Performance:

GS-68 high-speed vacuum pump oil has suitable viscosity, can make the vacuum pump start quickly at low temperature, and has good sealing at high temperature;

No. 68 vacuum pump oil has a low saturated vapor pressure, which prevents the oil from diffusing from the inner cavity of the pump to the vacuum system from backflowing, causing oil backflow to ensure sufficient ultimate vacuum;

No. 68 vacuum pump special oil has good oxidation stability, which avoids vacuum deterioration caused by oil oxidation and prolongs the oil change interval. It has a low saturated vapor pressure, and does not affect the vacuum ultimate pressure due to the rise of pump body and oil temperature;

No. 68 vacuum pump oil has excellent thermal stability and oxidation stability, which avoids the deterioration of the ultimate vacuum caused by the products generated by oxidation and pyrolysis during the use of the oil and the pollution of the vacuum system;

No. 68 vacuum pump special oil has good water separation and anti-foam resistance, avoiding the emulsification of oil and the formation of a large number of bubbles on the surface of the oil, causing the overflow of oil in the exhaust port of the pump and polluting the environment.

Use:

GS-68 high-speed vacuum pump oil is suitable for various mechanical vacuum pumps, roots vacuum pumps, and the application is better in direct pumps.

Wrap:

4L/drum, 16L/drum, 200L/drum

Notes:

GS-68 high-speed vacuum pump oil should be used and stored and transported to prevent the entry of pollutants such as mechanical impurities and water, so as not to affect the service life of vacuum oil and the normal operation of the system;

Residual oil often contains a large number of pollutants and aging products, which will seriously affect the quality and life of new oil, so when changing the oil, the oil tank and oil circuit should be cleaned. Pour new oil from the suction port of the pump, and slowly turn the pump shaft by hand, clean the pump chamber and drain the residual oil, and repeat the cleaning agent several times;

GS-68 high-speed vacuum pump oil different grades of vacuum pump oil quality is different, if mixed, may cause changes in oil quality, so different types of vacuum pump oil can not be mixed;

When used for solvents, water vapor and corrosive gases, check frequently after use, and change the oil when the oil is emulsified or diluted to affect the sealing performance of the pump.