I. Product Overview

EBARA Corporation is a listed Japanese manufacturer whose EV series multi-stage roots dry pumps are known for compact structure, oil-free cleanliness, and quiet operation, widely used in laboratories, semiconductor, and medical equipment where cleanliness and stability are critical. The EV-A10-2 is a standard model of the EV series. This unit is a used complete pump manufactured in 2017, Equipment ID DME01024, in well-maintained condition and ready for immediate installation. 1 unit in stock.

1.1 Key Specifications

1.2 Core Features

• Classic EBARA EV series model: original Japanese manufacture, large installed base
• Multi-stage roots dry pump: oil-free vacuum, no oil seal in the pump chamber, no back-streaming contamination
• Air-cooled design: no cooling water needed, flexible installation, ideal for labs and clean environments
• Single-phase 200-240V supply: runs on ordinary single-phase power, low connection threshold
• Compact and light: only 75 kg, easy benchtop/mobile placement
• Used complete unit: built in 2017, well maintained, no long lead time — install on arrival

II. Used-Pump Inspection Checklist

When buying a used dry vacuum pump, verify the following items one by one:

2.1 Inspection Recommendations

1. Request a running-test video: ultimate vacuum, current, noise, vibration
2. Verify the Equipment ID DME01024 matches the nameplate
3. Check inlet and outlet ports for damage
4. Check the air-cooling duct is clean and the fan runs normally
5. Power on and listen for abnormal roots-rotor noise

III. Application Matching

3.1 Suitable Applications

3.2 Used vs. New Comparison

IV. EBARA EV Series Model Reference

The EBARA EV series is a family of multi-stage roots dry vacuum pumps, sized by pumping speed and number of stages. The EV-A10-2 is the standard 1,000 L/min class model.

V. Taixing (Xiamen) Used-Pump Service

1. Real photos: what you see is what you get
2. Transparent specs: nameplate data listed item by item, re-test welcome
3. Technical support: Taixing Vacuum Equipment, Xiamen — hotline 0592-6800154
4. Parts & service: EBARA EV series repair, maintenance, and parts supply
5. Contact us for pricing: quoted by configuration and quantity

VI. FAQ

Q1: What is the price of this used EV-A10-2?

A: Contact us for pricing. Call Mr. Huang at 15880223078 or email mike@xiamenbest.com for a current quote.

Q2: Is the pump ready to use on arrival?

A: Yes — well-maintained and ready for immediate installation. Connect single-phase 200-240V power to run; air-cooled, no water needed.

Q3: It was built in 2017 — how worn is it?

A: Equipment ID DME01024 is traceable and the unit is well maintained. Request a running video or schedule an on-site inspection.

Q4: What scale is a 1,000 L/min pump?

A: A small-to-mid-size dry pump, exactly covering laboratory, MS/EM backing, and loadlock duties.

Q5: What are the advantages vs. buying new?

A: Short lead time (1 unit in stock), contact-us-for-pricing well below new, ideal for urgent installs and backup purchases.

Q6: Can it pump water vapor and process gases?

A: Yes. The oil-free dry design handles water vapor and general process media; for strongly corrosive gases, discuss the gas composition with us first.

Q7: Does it need cooling water?

A: No. This unit is air-cooled — power on and run, with more flexible placement than water-cooled models.